Y Series Slip Type Elevator最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It’s especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column.
| Model | Size | Rated Cap. | |
| mm(in) | kN | Short Tons | |
| HYT | 60.3-88.9 (23/8-31/2) | 1350 | 150 |
| YT | 33.4-88.9 (1.315-31/2) | 675 | 75 |
| MYT | 33.4-73 (1.315-27/8) | 360 | 40 |
| LYT | 26.7-52.4 (1.05-11/16) | 180 | 20 |
| HYC | 88.9-139.7 (31/2-75/8) | 1800 | 200 |
| MYC | 88.9-117.8 (31/2-7) | 1125 | 125 |
| YC | 88.9-117.8 (31/2-7) | 675 | 75 |
Y Series Slip Type Elevator最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
Model SLX side door elevator with square shoulder are suitable for handling tubing, casing, drill pipe and drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirement in API Spec
| Model | Size(in) | Rate Cap. (Short Tons) |
| SLX-65 | 3 1/4-14 3/8 | 65 |
| SLX-100 | 2 3/8-5 3/4 | 100 |
| SLX-150 | 5 1/2-13 5/8 | 150 |
| SLX-250 | 5 1/2-30 | 250 |
| SLX-350 | 4 1/2-14 | 350 |
Single Joint Elevator最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment .
| Model | Size | Rated Cap.（KN） | |
| in | mm | ||
| SJ | 2 3/8-2 7/8 | 60.3-73.03 | 45 |
| 3 1/2-4 3/4 | 88.9-120.7 | ||
| 5-5 3/4 | 127-146.1 | ||
| 6-7 3/4 | 152.4-193.7 | ||
| 8 5/8-10 3/4 | 219.1-273.1 | ||
| 11 3/4-13 3/8 | 298.5-339.7 | ||
| 13 5/8-14 | 346.1-355.6 | ||
| 16-20 | 406.4-508 | ||
| 21 1/2-24 1/2 | 546.1-622.3 | 60 | |
| 26-28 | 660.4-711.2 | ||
| 30-36 | 762.0-914.4 | ||
Single Joint Elevator最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>Sucker Rod Elevator最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
| Model | Sucker Rod Style (in) | Elevator Bores(mm) | Max. LoadTons (kN) | Weight (Kg) |
| SRE 19 | % | 19 | 20 | 12 |
| SRE23 | V/4 | 23 | ||
| SRE26 | 3/4-7/8 | 24 | ||
| SRE30 | 1 | 30 | ||
| SRE32 | 1% | 32 |
Sucker Rod Elevators are suitable for each size sucker rod in well repair.The Elevators are designed and manu factured according to A PI Spec 8A-specification for drilling and production Hoisting Equipment.
Sucker Rod Elevator最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
Model TA center latch elevators with square shoulder are suitable or handling, drill collar, casing and tubing. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
| Model | Size(in) | Rate Cap. (Short Tons) | |||
| DC | Tubing | (Casing) | |||
| NU | EU | ||||
| TA-35 | 27/8-31/8 | 1.05-27/8 | 1.05-27/8 | / | 35 |
| TA-65 | 27/8-31/8 | 1.66-27/8 | 1.66-27/8 | / | 65 |
| TA-100 | 37/8-51/4 | 23/8-5 | 23/8-5 | / | 100 |
| TA-150 | 41/8-111/4 | / | / | 41/2-103/4 | 150 |
DDZ Drill Pipe Elevators最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
DDZ series elevators are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons to 750 tons. The size ranges are from 2.3/8″?to 6.5/8″.
| Model | Size(in) | Rated Capacity (short tons) | Remark |
| DDZ -100 | 2.3/8-5 | 100 | MG |
| DDZ -150 | 2.3/8-5.1/2 | 150 | RG |
| DDZ -250 | 2.3/8-5.1/2 | 250 | MGG |
| DDZ -350 | 3.1/2-5.7/8 | 350 | GG |
| DDZ -350TD | 3.1/2-5.7/8 | 350 | For Top Drive |
| DDZ -500 | 3.1/2-6.5/8 | 500 | HGG |
| DDZ -500TD | 3.1/2-6.5/8 | 500 | For Top Drive |
| DDZ -750 | 4-6.5/8 | 750 |
DDZ Drill Pipe Elevators最先出現在DEZHOU L&A PETROLEUM MACHINERY CO.,LTD。
]]>
| Model | Size(in) | Rate Cap. (Short Tons) | ||
| (DP) | (Casing) | (Tubing) | ||
| DD-150 | 2- 5 1/2 | 4 1/2-5 1/2 | 2 3/8-4 1/2 | 150 |
| DD-250 | 2 3/8-5 1/2 | 4 1/2-5 1/2 | 2 3/8-4 1/2 | 250 |
| DD-350 | 2 3/8-5 1/2 | 4 1/2-5 1/2 | 2 3/8-4 1/2 | 350 |
| Model | Size(in) | Rate Cap. (Short Tons) |
| CDZ-150 | 2 3/8-5 1/2 | 150 |
| CDZ-250 | 2 3/8-5 1/2 | 250 |
| CDZ-350 | 2 7/8-5 1/2 | 350 |
| CDZ-500 | 3 1/2-5 1/2 | 500 |
CD elevator are conventional side door drill pipe elevators for handling 90 degree shoulder drill pipe in oil and gas drilling operation, CD drill pipe elevators are forged from high quality alloy steel, heat-treated, and NDT tested. The rated loads range from 150t to 750t, and cover pipe sizes from 2.3/8″ to 9.7/8″O.D .
| Model | Size(in) | Rate Cap.(Short Tons) |
| CD-100 | 2 3/8-5 1/2 | 100 |
| CD-150 | 2 3/8-14 | 150 |
| CD-200 | 2 3/8-14 | 200 |
| CD-250 | 2 3/8-20 | 250 |
| CD-350 | 4 1/2-20 | 350 |
| CD-500 | 4 1/2-14 | 500 |
| CD-750 | 4 1/2-9 7/8 | 750 |